fio 설치 & 사용방법.

SMALL

fio 설치 >

# yum install gcc -y
# yum install libaio-devel -y
download http://freecode.com/projects/fio
1. # wget -O /var/usr/fio-2.1.10.tar.gz http://freecode.com/urls/3aa21b8c106cab742bf1f20d60629e3f
# tar xf fio-2.1.10.tar.gz
# cd fio-2.1.10
# ./configure
# make
(make install)

fio 사용법 >

http://linux.die.net/man/1/fio - 출처

Name

fio - flexible I/O tester

Synopsis

fio [options] [jobfile]...

Description

fio is a tool that will spawn a number of threads or processes doing a particular type of I/O action as specified by the user. The typical use of fio is to write a job file matching the I/O load one wants to simulate.

Options

--debug=type

Enable verbose tracing of various fio actions. May be 'all' for all types or individual types separated by a comma (eg --debug=io,file). 'help' will list all available tracing options.
--output=filename: Write output to filename.
--runtime=runtime: Limit run time to runtime seconds.
--latency-log: Generate per-job latency logs.
--bandwidth-log: Generate per-job bandwidth logs.
--minimal: Print statistics in a terse, semicolon-delimited format.
--version: Display version information and exit.
--terse-version=version: Set terse version output format (Current version 3, or older version 2).
--help
Display usage information and exit.
--cmdhelp=command: Print help information for command. May be 'all' for all commands.
--enghelp=ioengine[,command]: List all commands defined by ioengine, or print help for command defined by ioengine.
--showcmd=jobfile: Convert jobfile to a set of command-line options.
--readonly: Enable read-only safety checks.
--eta=when: Specifies when real-time ETA estimate should be printed. when may be one of 'always', 'never' or 'auto'.
--readonly: Turn on safety read-only checks, preventing any attempted write.
--section=sec: Only run section sec from job file. Multiple of these options can be given, adding more sections to run.
--alloc-size=kb: Set the internal smalloc pool size to kb kilobytes.
--warnings-fatal: All fio parser warnings are fatal, causing fio to exit with an error.
--max-jobs=nr: Set the maximum allowed number of jobs (threads/processes) to support.
--server=args: Start a backend server, with args specifying what to listen to. See client/server section.
--daemonize=pidfile: Background a fio server, writing the pid to the given pid file.
--client=host: Instead of running the jobs locally, send and run them on the given host.

Job File Format

Job files are in 'ini' format. They consist of one or more job definitions, which begin with a job name in square brackets and extend to the next job name. The job name can be any ASCII string except 'global', which has a special meaning. Following the job name is a sequence of zero or more parameters, one per line, that define the behavior of the job. Any line starting with a ';' or '#' character is considered a comment and ignored.

If jobfile is specified as '-', the job file will be read from standard input.

Global Section

The global section contains default parameters for jobs specified in the job file. A job is only affected by global sections residing above it, and there may be any number of global sections. Specific job definitions may override any parameter set in global sections.

Job Parameters

Types

Some parameters may take arguments of a specific type. The types used are:
str String: a sequence of alphanumeric characters. int SI integer: a whole number, possibly containing a suffix denoting the base unit of the value. Accepted suffixes are 'k', 'M', 'G', 'T', and 'P', denoting kilo (1024), mega (1024^2), giga (1024^3), tera (1024^4), and peta (1024^5) respectively. The suffix is not case sensitive. If prefixed with '0x', the value is assumed to be base 16 (hexadecimal). A suffix may include a trailing 'b', for instance 'kb' is identical to 'k'. You can specify a base 10 value by using 'KiB', 'MiB', 'GiB', etc. This is useful for disk drives where values are often given in base 10 values. Specifying '30GiB' will get you 30*1000^3 bytes. bool Boolean: a true or false value. '0' denotes false, '1' denotes true. irange Integer range: a range of integers specified in the format lower:upper or lower-upper. lower and upper may contain a suffix as described above. If an option allows two sets of ranges, they are separated with a ',' or '/' character. For example: '8-8k/8M-4G'.
float_list: List of floating numbers: A list of floating numbers, separated by a ':' charcater.

Parameter List

name=str: May be used to override the job name. On the command line, this parameter has the special purpose of signalling the start of a new job.
description=str: Human-readable description of the job. It is printed when the job is run, but otherwise has no special purpose.
directory=str: Prefix filenames with this directory. Used to place files in a location other than './'.
filename=str: fio normally makes up a file name based on the job name, thread number, and file number. If you want to share files between threads in a job or several jobs, specify a filename for each of them to override the default. If the I/O engine is file-based, you can specify a number of files by separating the names with a ':' character. '-' is a reserved name, meaning stdin or stdout, depending on the read/write direction set.
lockfile=str: Fio defaults to not locking any files before it does IO to them. If a file or file descriptor is shared, fio can serialize IO to that file to make the end result consistent. This is usual for emulating real workloads that share files. The lock modes are:

none

No locking. This is the default.

exclusive

Only one thread or process may do IO at the time, excluding all others.

readwrite

Read-write locking on the file. Many readers may access the file at the same time, but writes get exclusive access.

The option may be post-fixed with a lock batch number. If set, then each thread/process may do that amount of IOs to the file before giving up the lock. Since lock acquisition is expensive, batching the lock/unlocks will speed up IO.
opendir=str Recursively open any files below directory str.
readwrite=str, rw=str: Type of I/O pattern. Accepted values are:

read

Sequential reads.

write

Sequential writes.

randread

Random reads.

randwrite

Random writes.

rw, readwrite

Mixed sequential reads and writes.

randrw

Mixed random reads and writes.

For mixed I/O, the default split is 50/50. For certain types of io the result may still be skewed a bit, since the speed may be different. It is possible to specify a number of IO's to do before getting a new offset, this is done by appending a ':<nr> to the end of the string given. For a random read, it would look like rw=randread:8 for passing in an offset modifier with a value of 8. If the postfix is used with a sequential IO pattern, then the value specified will be added to the generated offset for each IO. For instance, using rw=write:4k will skip 4k for every write. It turns sequential IO into sequential IO with holes. See the rw_sequencer option.
rw_sequencer=str: If an offset modifier is given by appending a number to the rw=<str> line, then this option controls how that number modifies the IO offset being generated. Accepted values are:

sequential

Generate sequential offset

identical

Generate the same offset

sequential is only useful for random IO, where fio would normally generate a new random offset for every IO. If you append eg 8 to randread, you would get a new random offset for every 8 IO's. The result would be a seek for only every 8 IO's, instead of for every IO. Use rw=randread:8 to specify that. As sequential IO is already sequential, setting sequential for that would not result in any differences. identical behaves in a similar fashion, except it sends the same offset 8 number of times before generating a new offset.
kb_base=int: The base unit for a kilobyte. The defacto base is 2^10, 1024. Storage manufacturers like to use 10^3 or 1000 as a base ten unit instead, for obvious reasons. Allow values are 1024 or 1000, with 1024 being the default.
randrepeat=bool: Seed the random number generator in a predictable way so results are repeatable across runs. Default: true.
use_os_rand=bool: Fio can either use the random generator supplied by the OS to generator random offsets, or it can use it's own internal generator (based on Tausworthe). Default is to use the internal generator, which is often of better quality and faster. Default: false.
fallocate=str: Whether pre-allocation is performed when laying down files. Accepted values are:

none

Do not pre-allocate space.

posix

Pre-allocate via posix_fallocate().

keep

Pre-allocate via fallocate() with FALLOC_FL_KEEP_SIZE set.

Backward-compatible alias for 'none'.

Backward-compatible alias for 'posix'.

May not be available on all supported platforms. 'keep' is only available on Linux. If using ZFS on Solaris this must be set to 'none' because ZFS doesn't support it. Default: 'posix'.
fadvise_hint=bool: Use of posix_fadvise(2) to advise the kernel what I/O patterns are likely to be issued. Default: true.
size=int: Total size of I/O for this job. fio will run until this many bytes have been transfered, unless limited by other options (runtime, for instance). Unless nrfiles and filesize options are given, this amount will be divided between the available files for the job. If not set, fio will use the full size of the given files or devices. If the the files do not exist, size must be given. It is also possible to give size as a percentage between 1 and 100. If size=20% is given, fio will use 20% of the full size of the given files or devices.
fill_device=bool, fill_fs=bool: Sets size to something really large and waits for ENOSPC (no space left on device) as the terminating condition. Only makes sense with sequential write. For a read workload, the mount point will be filled first then IO started on the result. This option doesn't make sense if operating on a raw device node, since the size of that is already known by the file system. Additionally, writing beyond end-of-device will not return ENOSPC there.
filesize=irange: Individual file sizes. May be a range, in which case fio will select sizes for files at random within the given range, limited to size in total (if that is given). If filesize is not specified, each created file is the same size.
blocksize=int[,int], bs=int[,int]: Block size for I/O units. Default: 4k. Values for reads and writes can be specified separately in the format read,write, either of which may be empty to leave that value at its default.
blocksize_range=irange[,irange], bsrange=irange[,irange]: Specify a range of I/O block sizes. The issued I/O unit will always be a multiple of the minimum size, unless blocksize_unaligned is set. Applies to both reads and writes if only one range is given, but can be specified separately with a comma seperating the values. Example: bsrange=1k-4k,2k-8k. Also (see blocksize).
bssplit=str: This option allows even finer grained control of the block sizes issued, not just even splits between them. With this option, you can weight various block sizes for exact control of the issued IO for a job that has mixed block sizes. The format of the option is bssplit=blocksize/percentage, optionally adding as many definitions as needed separated by a colon. Example: bssplit=4k/10:64k/50:32k/40 would issue 50% 64k blocks, 10% 4k blocks and 40% 32k blocks. bssplit also supports giving separate splits to reads and writes. The format is identical to what the bs option accepts, the read and write parts are separated with a comma.
blocksize_unaligned, bs_unaligned: If set, any size in blocksize_range may be used. This typically won't work with direct I/O, as that normally requires sector alignment.
blockalign=int[,int], ba=int[,int]: At what boundary to align random IO offsets. Defaults to the same as 'blocksize' the minimum blocksize given. Minimum alignment is typically 512b for using direct IO, though it usually depends on the hardware block size. This option is mutually exclusive with using a random map for files, so it will turn off that option.
zero_buffers: Initialise buffers with all zeros. Default: fill buffers with random data.
refill_buffers: If this option is given, fio will refill the IO buffers on every submit. The default is to only fill it at init time and reuse that data. Only makes sense if zero_buffers isn't specified, naturally. If data verification is enabled, refill_buffers is also automatically enabled.
scramble_buffers=bool: If refill_buffers is too costly and the target is using data deduplication, then setting this option will slightly modify the IO buffer contents to defeat normal de-dupe attempts. This is not enough to defeat more clever block compression attempts, but it will stop naive dedupe of blocks. Default: true.
buffer_compress_percentage=int: If this is set, then fio will attempt to provide IO buffer content (on WRITEs) that compress to the specified level. Fio does this by providing a mix of random data and zeroes. Note that this is per block size unit, for file/disk wide compression level that matches this setting, you'll also want to set refill_buffers.
buffer_compress_chunk=int: See buffer_compress_percentage. This setting allows fio to manage how big the ranges of random data and zeroed data is. Without this set, fio will provide buffer_compress_percentage of blocksize random data, followed by the remaining zeroed. With this set to some chunk size smaller than the block size, fio can alternate random and zeroed data throughout the IO buffer.
nrfiles=int: Number of files to use for this job. Default: 1.
openfiles=int: Number of files to keep open at the same time. Default: nrfiles.
file_service_type=str: Defines how files to service are selected. The following types are defined:

random

Choose a file at random

roundrobin

Round robin over open files (default). sequential Do each file in the set sequentially.

The number of I/Os to issue before switching a new file can be specified by appending ':int' to the service type.
ioengine=str: Defines how the job issues I/O. The following types are defined:

sync

Basic read(2) or write(2) I/O. fseek(2) is used to position the I/O location.

psync

Basic pread(2) or pwrite(2) I/O.

vsync

Basic readv(2) or writev(2) I/O. Will emulate queuing by coalescing adjacents IOs into a single submission.

libaio

Linux native asynchronous I/O. This ioengine defines engine specific options.

posixaio

POSIX asynchronous I/O using aio_read(3) and aio_write(3).

solarisaio

Solaris native asynchronous I/O.

windowsaio

Windows native asynchronous I/O.

mmap

File is memory mapped with mmap(2) and data copied using memcpy(3).

splice

splice(2) is used to transfer the data and vmsplice(2) to transfer data from user-space to the kernel.

syslet-rw

Use the syslet system calls to make regular read/write asynchronous.

SCSI generic sg v3 I/O. May be either synchronous using the SG_IO ioctl, or if the target is an sg character device, we use read(2) and write(2) for asynchronous I/O.

null

Doesn't transfer any data, just pretends to. Mainly used to exercise fio itself and for debugging and testing purposes.

net

Transfer over the network. The protocol to be used can be defined with the protocol parameter. Depending on the protocol, filename, hostname, port, or listen must be specified. This ioengine defines engine specific options.

netsplice

Like net, but uses splice(2) and vmsplice(2) to map data and send/receive. This ioengine defines engine specific options.

cpuio

Doesn't transfer any data, but burns CPU cycles according to cpuload and cpucycles parameters.

guasi

The GUASI I/O engine is the Generic Userspace Asynchronous Syscall Interface approach to asycnronous I/O.

See <http://www.xmailserver.org/guasi-lib.html>.

rdma

The RDMA I/O engine supports both RDMA memory semantics (RDMA_WRITE/RDMA_READ) and channel semantics (Send/Recv) for the InfiniBand, RoCE and iWARP protocols.

external

Loads an external I/O engine object file. Append the engine filename as ':enginepath'.

falloc

IO engine that does regular linux native fallocate callt to simulate data transfer as fio ioengine

DDIR_READ does fallocate(,mode = FALLOC_FL_KEEP_SIZE,)
DIR_WRITE does fallocate(,mode = 0)
DDIR_TRIM does fallocate(,mode = FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE)

e4defrag

IO engine that does regular EXT4_IOC_MOVE_EXT ioctls to simulate defragment activity request to DDIR_WRITE event

iodepth=int: Number of I/O units to keep in flight against the file. Note that increasing iodepth beyond 1 will not affect synchronous ioengines (except for small degress when verify_async is in use). Even async engines my impose OS restrictions causing the desired depth not to be achieved. This may happen on Linux when using libaio and not setting direct=1, since buffered IO is not async on that OS. Keep an eye on the IO depth distribution in the fio output to verify that the achieved depth is as expected. Default: 1.
iodepth_batch=int: Number of I/Os to submit at once. Default: iodepth.
iodepth_batch_complete=int: This defines how many pieces of IO to retrieve at once. It defaults to 1 which means that we'll ask for a minimum of 1 IO in the retrieval process from the kernel. The IO retrieval will go on until we hit the limit set by iodepth_low. If this variable is set to 0, then fio will always check for completed events before queuing more IO. This helps reduce IO latency, at the cost of more retrieval system calls.
iodepth_low=int: Low watermark indicating when to start filling the queue again. Default: iodepth.
direct=bool: If true, use non-buffered I/O (usually O_DIRECT). Default: false.
buffered=bool: If true, use buffered I/O. This is the opposite of the direct parameter. Default: true.
offset=int: Offset in the file to start I/O. Data before the offset will not be touched.
offset_increment=int: If this is provided, then the real offset becomes the offset + offset_increment * thread_number, where the thread number is a counter that starts at 0 and is incremented for each job. This option is useful if there are several jobs which are intended to operate on a file in parallel in disjoint segments, with even spacing between the starting points.
fsync=int: How many I/Os to perform before issuing an fsync(2) of dirty data. If 0, don't sync. Default: 0.
fdatasync=int: Like fsync, but uses fdatasync(2) instead to only sync the data parts of the file. Default: 0.
sync_file_range=str:int: Use sync_file_range() for every val number of write operations. Fio will track range of writes that have happened since the last sync_file_range() call. str can currently be one or more of:; wait_before

SYNC_FILE_RANGE_WAIT_BEFORE

write

SYNC_FILE_RANGE_WRITE

wait_after

SYNC_FILE_RANGE_WRITE

So if you do sync_file_range=wait_before,write:8, fio would use

SYNC_FILE_RANGE_WAIT_BEFORE | SYNC_FILE_RANGE_WRITE for every 8 writes. Also see the sync_file_range(2) man page. This option is Linux specific.

overwrite=bool

If writing, setup the file first and do overwrites. Default: false.

end_fsync=bool

Sync file contents when job exits. Default: false.

fsync_on_close=bool

If true, sync file contents on close. This differs from end_fsync in that it will happen on every close, not just at the end of the job. Default: false.

rwmixread=int

Percentage of a mixed workload that should be reads. Default: 50.

rwmixwrite=int

Percentage of a mixed workload that should be writes. If rwmixread and rwmixwrite are given and do not sum to 100%, the latter of the two overrides the first. This may interfere with a given rate setting, if fio is asked to limit reads or writes to a certain rate. If that is the case, then the distribution may be skewed. Default: 50.

random_distribution=str:float

By default, fio will use a completely uniform random distribution when asked to perform random IO. Sometimes it is useful to skew the distribution in specific ways, ensuring that some parts of the data is more hot than others. Fio includes the following distribution models:

random

Uniform random distribution

zipf

Zipf distribution

pareto

Pareto distribution

When using a zipf or pareto distribution, an input value is also needed to

define the access pattern. For zipf, this is the zipf theta. For pareto, it's the pareto power. Fio includes a test program, genzipf, that can be used visualize what the given input values will yield in terms of hit rates. If you wanted to use zipf with a theta of 1.2, you would use random_distribution=zipf:1.2 as the option. If a non-uniform model is used, fio will disable use of the random map.

norandommap

Normally fio will cover every block of the file when doing random I/O. If this parameter is given, a new offset will be chosen without looking at past I/O history. This parameter is mutually exclusive with verify.

softrandommap=bool

See norandommap. If fio runs with the random block map enabled and it fails to allocate the map, if this option is set it will continue without a random block map. As coverage will not be as complete as with random maps, this option is disabled by default.

random_generator=str

Fio supports the following engines for generating IO offsets for random IO:

tausworthe

Strong 2^88 cycle random number generator

lfsr
Linear feedback shift register generator
Tausworthe is a strong random number generator, but it requires tracking on the: side if we want to ensure that blocks are only read or written once. LFSR guarantees that we never generate the same offset twice, and it's also less computationally expensive. It's not a true random generator, however, though for IO purposes it's typically good enough. LFSR only works with single block sizes, not with workloads that use multiple block sizes. If used with such a workload, fio may read or write some blocks multiple times.
nice=int: Run job with given nice value. See nice(2).
prio=int: Set I/O priority value of this job between 0 (highest) and 7 (lowest). See ionice(1).
prioclass=int: Set I/O priority class. See ionice(1).
thinktime=int: Stall job for given number of microseconds between issuing I/Os.
thinktime_spin=int: Pretend to spend CPU time for given number of microseconds, sleeping the rest of the time specified by thinktime. Only valid if thinktime is set.
thinktime_blocks=int: Number of blocks to issue before waiting thinktime microseconds. Default: 1.
rate=int: Cap bandwidth used by this job. The number is in bytes/sec, the normal postfix rules apply. You can use rate=500k to limit reads and writes to 500k each, or you can specify read and writes separately. Using rate=1m,500k would limit reads to 1MB/sec and writes to 500KB/sec. Capping only reads or writes can be done with rate=,500k or rate=500k,. The former will only limit writes (to 500KB/sec), the latter will only limit reads.
ratemin=int: Tell fio to do whatever it can to maintain at least the given bandwidth. Failing to meet this requirement will cause the job to exit. The same format as rate is used for read vs write separation.
rate_iops=int: Cap the bandwidth to this number of IOPS. Basically the same as rate, just specified independently of bandwidth. The same format as rate is used for read vs write seperation. If blocksize is a range, the smallest block size is used as the metric.
rate_iops_min=int: If this rate of I/O is not met, the job will exit. The same format as rate is used for read vs write seperation.
ratecycle=int: Average bandwidth for rate and ratemin over this number of milliseconds. Default: 1000ms.
max_latency=int: If set, fio will exit the job if it exceeds this maximum latency. It will exit with an ETIME error.
cpumask=int: Set CPU affinity for this job. int is a bitmask of allowed CPUs the job may run on. See sched_setaffinity(2).
cpus_allowed=str: Same as cpumask, but allows a comma-delimited list of CPU numbers.
numa_cpu_nodes=str: Set this job running on spcified NUMA nodes' CPUs. The arguments allow comma delimited list of cpu numbers, A-B ranges, or 'all'.
numa_mem_policy=str: Set this job's memory policy and corresponding NUMA nodes. Format of the argements:; <mode>[:<nodelist>]; mode
is one of the following memory policy:; default, prefer, bind, interleave, local
For default and local memory policy, no nodelist is: needed to be specified. For prefer, only one node is allowed. For bind and interleave, nodelist allows comma delimited list of numbers, A-B ranges, or 'all'.
startdelay=int: Delay start of job for the specified number of seconds.
runtime=int: Terminate processing after the specified number of seconds.
time_based: If given, run for the specified runtime duration even if the files are completely read or written. The same workload will be repeated as many times as runtime allows.
ramp_time=int: If set, fio will run the specified workload for this amount of time before logging any performance numbers. Useful for letting performance settle before logging results, thus minimizing the runtime required for stable results. Note that the ramp_time is considered lead in time for a job, thus it will increase the total runtime if a special timeout or runtime is specified.
invalidate=bool: Invalidate buffer-cache for the file prior to starting I/O. Default: true.
sync=bool: Use synchronous I/O for buffered writes. For the majority of I/O engines, this means using O_SYNC. Default: false.
iomem=str, mem=str: Allocation method for I/O unit buffer. Allowed values are:

malloc

Allocate memory with malloc(3).

shm

Use shared memory buffers allocated through shmget(2).

shmhuge

Same as shm, but use huge pages as backing.

mmap

Use mmap(2) for allocation. Uses anonymous memory unless a filename is given after the option in the format ':file'.

mmaphuge

Same as mmap, but use huge files as backing.

The amount of memory allocated is the maximum allowed blocksize for the job multiplied by iodepth. For shmhuge or mmaphuge to work, the system must have free huge pages allocated. mmaphuge also needs to have hugetlbfs mounted, and file must point there. At least on Linux, huge pages must be manually allocated. See /proc/sys/vm/nr_hugehages and the documentation for that. Normally you just need to echo an appropriate number, eg echoing 8 will ensure that the OS has 8 huge pages ready for use.
iomem_align=int, mem_align=int: This indiciates the memory alignment of the IO memory buffers. Note that the given alignment is applied to the first IO unit buffer, if using iodepth the alignment of the following buffers are given by the bs used. In other words, if using a bs that is a multiple of the page sized in the system, all buffers will be aligned to this value. If using a bs that is not page aligned, the alignment of subsequent IO memory buffers is the sum of the iomem_align and bs used.
hugepage-size=int: Defines the size of a huge page. Must be at least equal to the system setting. Should be a multiple of 1MB. Default: 4MB.
exitall: Terminate all jobs when one finishes. Default: wait for each job to finish.
bwavgtime=int: Average bandwidth calculations over the given time in milliseconds. Default: 500ms.
iopsavgtime=int: Average IOPS calculations over the given time in milliseconds. Default: 500ms.
create_serialize=bool: If true, serialize file creation for the jobs. Default: true.
create_fsync=bool: fsync(2) data file after creation. Default: true.
create_on_open=bool: If true, the files are not created until they are opened for IO by the job.
create_only=bool: If true, fio will only run the setup phase of the job. If files need to be laid out or updated on disk, only that will be done. The actual job contents are not executed.
pre_read=bool: If this is given, files will be pre-read into memory before starting the given IO operation. This will also clear the invalidate flag, since it is pointless to pre-read and then drop the cache. This will only work for IO engines that are seekable, since they allow you to read the same data multiple times. Thus it will not work on eg network or splice IO.
unlink=bool: Unlink job files when done. Default: false.
loops=int: Specifies the number of iterations (runs of the same workload) of this job. Default: 1.
do_verify=bool: Run the verify phase after a write phase. Only valid if verify is set. Default: true.
verify=str: Method of verifying file contents after each iteration of the job. Allowed values are:

md5 crc16 crc32 crc32c crc32c-intel crc64 crc7 sha256 sha512 sha1

Store appropriate checksum in the header of each block. crc32c-intel is hardware accelerated SSE4.2 driven, falls back to regular crc32c if not supported by the system.

meta

Write extra information about each I/O (timestamp, block number, etc.). The block number is verified. See verify_pattern as well.

null

Pretend to verify. Used for testing internals.

This option can be used for repeated burn-in tests of a system to make sure that the written data is also correctly read back. If the data direction given is a read or random read, fio will assume that it should verify a previously written file. If the data direction includes any form of write, the verify will be of the newly written data.
verify_sort=bool: If true, written verify blocks are sorted if fio deems it to be faster to read them back in a sorted manner. Default: true.
verify_offset=int: Swap the verification header with data somewhere else in the block before writing. It is swapped back before verifying.
verify_interval=int: Write the verification header for this number of bytes, which should divide blocksize. Default: blocksize.
verify_pattern=str: If set, fio will fill the io buffers with this pattern. Fio defaults to filling with totally random bytes, but sometimes it's interesting to fill with a known pattern for io verification purposes. Depending on the width of the pattern, fio will fill 1/2/3/4 bytes of the buffer at the time(it can be either a decimal or a hex number). The verify_pattern if larger than a 32-bit quantity has to be a hex number that starts with either "0x" or "0X". Use with verify=meta.
verify_fatal=bool: If true, exit the job on the first observed verification failure. Default: false.
verify_dump=bool: If set, dump the contents of both the original data block and the data block we read off disk to files. This allows later analysis to inspect just what kind of data corruption occurred. Off by default.
verify_async=int: Fio will normally verify IO inline from the submitting thread. This option takes an integer describing how many async offload threads to create for IO verification instead, causing fio to offload the duty of verifying IO contents to one or more separate threads. If using this offload option, even sync IO engines can benefit from using an iodepth setting higher than 1, as it allows them to have IO in flight while verifies are running.
verify_async_cpus=str: Tell fio to set the given CPU affinity on the async IO verification threads. See cpus_allowed for the format used.
verify_backlog=int: Fio will normally verify the written contents of a job that utilizes verify once that job has completed. In other words, everything is written then everything is read back and verified. You may want to verify continually instead for a variety of reasons. Fio stores the meta data associated with an IO block in memory, so for large verify workloads, quite a bit of memory would be used up holding this meta data. If this option is enabled, fio will write only N blocks before verifying these blocks.
verify_backlog_batch=int: Control how many blocks fio will verify if verify_backlog is set. If not set, will default to the value of verify_backlog (meaning the entire queue is read back and verified). If verify_backlog_batch is less than verify_backlog then not all blocks will be verified, if verify_backlog_batch is larger than verify_backlog, some blocks will be verified more than once.
stonewall , wait_for_previous: Wait for preceding jobs in the job file to exit before starting this one. stonewall implies new_group.
new_group: Start a new reporting group. If not given, all jobs in a file will be part of the same reporting group, unless separated by a stonewall.
numjobs=int: Number of clones (processes/threads performing the same workload) of this job. Default: 1.
group_reporting: If set, display per-group reports instead of per-job when numjobs is specified.
thread
Use threads created with pthread_create(3) instead of processes created with fork(2).
zonesize=int: Divide file into zones of the specified size in bytes. See zoneskip.
zoneskip=int: Skip the specified number of bytes when zonesize bytes of data have been read.
write_iolog=str: Write the issued I/O patterns to the specified file. Specify a separate file for each job, otherwise the iologs will be interspersed and the file may be corrupt.
read_iolog=str: Replay the I/O patterns contained in the specified file generated by write_iolog, or may be a blktrace binary file.
replay_no_stall=int: While replaying I/O patterns using read_iolog the default behavior attempts to respect timing information between I/Os. Enabling replay_no_stall causes I/Os to be replayed as fast as possible while still respecting ordering.
replay_redirect=str: While replaying I/O patterns using read_iolog the default behavior is to replay the IOPS onto the major/minor device that each IOP was recorded from. Setting replay_redirect causes all IOPS to be replayed onto the single specified device regardless of the device it was recorded from.
write_bw_log=str: If given, write a bandwidth log of the jobs in this job file. Can be used to store data of the bandwidth of the jobs in their lifetime. The included fio_generate_plots script uses gnuplot to turn these text files into nice graphs. See write_log_log for behaviour of given filename. For this option, the postfix is _bw.log.
write_lat_log=str: Same as write_bw_log, but writes I/O completion latencies. If no filename is given with this option, the default filename of "jobname_type.log" is used. Even if the filename is given, fio will still append the type of log.
write_iops_log=str: Same as write_bw_log, but writes IOPS. If no filename is given with this option, the default filename of "jobname_type.log" is used. Even if the filename is given, fio will still append the type of log.
log_avg_msec=int: By default, fio will log an entry in the iops, latency, or bw log for every IO that completes. When writing to the disk log, that can quickly grow to a very large size. Setting this option makes fio average the each log entry over the specified period of time, reducing the resolution of the log. Defaults to 0.
disable_lat=bool: Disable measurements of total latency numbers. Useful only for cutting back the number of calls to gettimeofday, as that does impact performance at really high IOPS rates. Note that to really get rid of a large amount of these calls, this option must be used with disable_slat and disable_bw as well.
disable_clat=bool: Disable measurements of completion latency numbers. See disable_lat.
disable_slat=bool: Disable measurements of submission latency numbers. See disable_lat.
disable_bw_measurement=bool: Disable measurements of throughput/bandwidth numbers. See disable_lat.
lockmem=int: Pin the specified amount of memory with mlock(2). Can be used to simulate a smaller amount of memory.
exec_prerun=str: Before running the job, execute the specified command with system(3).
exec_postrun=str: Same as exec_prerun, but the command is executed after the job completes.
ioscheduler=str: Attempt to switch the device hosting the file to the specified I/O scheduler.
cpuload=int: If the job is a CPU cycle-eater, attempt to use the specified percentage of CPU cycles.
cpuchunks=int: If the job is a CPU cycle-eater, split the load into cycles of the given time in milliseconds.
disk_util=bool: Generate disk utilization statistics if the platform supports it. Default: true.
clocksource=str: Use the given clocksource as the base of timing. The supported options are:; gettimeofday

gettimeofday(2)

clock_gettime

clock_gettime(2)

cpu
Internal CPU clock source
cpu is the preferred clocksource if it is reliable, as it is very fast: (and fio is heavy on time calls). Fio will automatically use this clocksource if it's supported and considered reliable on the system it is running on, unless another clocksource is specifically set. For x86/x86-64 CPUs, this means supporting TSC Invariant.
gtod_reduce=bool: Enable all of the gettimeofday() reducing options (disable_clat, disable_slat, disable_bw) plus reduce precision of the timeout somewhat to really shrink the gettimeofday() call count. With this option enabled, we only do about 0.4% of the gtod() calls we would have done if all time keeping was enabled.
gtod_cpu=int: Sometimes it's cheaper to dedicate a single thread of execution to just getting the current time. Fio (and databases, for instance) are very intensive on gettimeofday() calls. With this option, you can set one CPU aside for doing nothing but logging current time to a shared memory location. Then the other threads/processes that run IO workloads need only copy that segment, instead of entering the kernel with a gettimeofday() call. The CPU set aside for doing these time calls will be excluded from other uses. Fio will manually clear it from the CPU mask of other jobs.
ignore_error=str: Sometimes you want to ignore some errors during test in that case you can specify error list for each error type.
ignore_error=READ_ERR_LIST,WRITE_ERR_LIST,VERIFY_ERR_LIST
errors for given error type is separated with ':'. Error may be symbol ('ENOSPC', 'ENOMEM') or an integer.
Example: ignore_error=EAGAIN,ENOSPC:122 .
This option will ignore EAGAIN from READ, and ENOSPC and 122(EDQUOT) from WRITE.
error_dump=bool: If set dump every error even if it is non fatal, true by default. If disabled only fatal error will be dumped
cgroup=str: Add job to this control group. If it doesn't exist, it will be created. The system must have a mounted cgroup blkio mount point for this to work. If your system doesn't have it mounted, you can do so with:
# mount -t cgroup -o blkio none /cgroup
cgroup_weight=int: Set the weight of the cgroup to this value. See the documentation that comes with the kernel, allowed values are in the range of 100..1000.
cgroup_nodelete=bool: Normally fio will delete the cgroups it has created after the job completion. To override this behavior and to leave cgroups around after the job completion, set cgroup_nodelete=1. This can be useful if one wants to inspect various cgroup files after job completion. Default: false
uid=int: Instead of running as the invoking user, set the user ID to this value before the thread/process does any work.
gid=int: Set group ID, see uid.
flow_id=int: The ID of the flow. If not specified, it defaults to being a global flow. See flow.
flow=int: Weight in token-based flow control. If this value is used, then there is a flow counter which is used to regulate the proportion of activity between two or more jobs. fio attempts to keep this flow counter near zero. The flow parameter stands for how much should be added or subtracted to the flow counter on each iteration of the main I/O loop. That is, if one job has flow=8 and another job has flow=-1, then there will be a roughly 1:8 ratio in how much one runs vs the other.
flow_watermark=int: The maximum value that the absolute value of the flow counter is allowed to reach before the job must wait for a lower value of the counter.
flow_sleep=int: The period of time, in microseconds, to wait after the flow watermark has been exceeded before retrying operations
clat_percentiles=bool: Enable the reporting of percentiles of completion latencies.
percentile_list=float_list: Overwrite the default list of percentiles for completion latencies. Each number is a floating number in the range (0,100], and the maximum length of the list is 20. Use ':' to separate the numbers. For example, --percentile_list=99.5:99.9 will cause fio to report the values of completion latency below which 99.5% and 99.9% of the observed latencies fell, respectively.

Ioengine Parameters List

Some parameters are only valid when a specific ioengine is in use. These are used identically to normal parameters, with the caveat that when used on the command line, the must come after the ioengine that defines them is selected.
(libaio)userspace_reap: Normally, with the libaio engine in use, fio will use the io_getevents system call to reap newly returned events. With this flag turned on, the AIO ring will be read directly from user-space to reap events. The reaping mode is only enabled when polling for a minimum of 0 events (eg when iodepth_batch_complete=0).
(net,netsplice)hostname=str: The host name or IP address to use for TCP or UDP based IO. If the job is a TCP listener or UDP reader, the hostname is not used and must be omitted.
(net,netsplice)port=int: The TCP or UDP port to bind to or connect to.
(net,netsplice)protocol=str, proto=str: The network protocol to use. Accepted values are:

tcp

Transmission control protocol

udp

User datagram protocol

unix

UNIX domain socket

When the protocol is TCP or UDP, the port must also be given, as well as the hostname if the job is a TCP listener or UDP reader. For unix sockets, the normal filename option should be used and the port is invalid.
(net,netsplice)listen: For TCP network connections, tell fio to listen for incoming connections rather than initiating an outgoing connection. The hostname must be omitted if this option is used.
(net,pingpong)=bool: Normal a network writer will just continue writing data, and a network reader will just consume packages. If pingpong=1 is set, a writer will send its normal payload to the reader, then wait for the reader to send the same payload back. This allows fio to measure network latencies. The submission and completion latencies then measure local time spent sending or receiving, and the completion latency measures how long it took for the other end to receive and send back.
(e4defrag,donorname)=str: File will be used as a block donor (swap extents between files)
(e4defrag,inplace)=int

Configure donor file block allocation strategy

0(default): Preallocate donor's file on init

allocate space immidietly inside defragment event, and free right after event

Output

While running, fio will display the status of the created jobs. For example:

Threads: 1: [_r] [24.8% done] [ 13509/ 8334 kb/s] [eta 00h:01m:31s]

The characters in the first set of brackets denote the current status of each threads. The possible values are:

Setup but not started.

Thread created.

Initialized, waiting.

Running, doing sequential reads.

Running, doing random reads.

Running, doing sequential writes.

Running, doing random writes.

Running, doing mixed sequential reads/writes.

Running, doing mixed random reads/writes.

Running, currently waiting for fsync(2).

Running, verifying written data.

Exited, not reaped by main thread.

Exited, thread reaped.

The second set of brackets shows the estimated completion percentage of the current group. The third set shows the read and write I/O rate, respectively. Finally, the estimated run time of the job is displayed.
When fio completes (or is interrupted by Ctrl-C), it will show data for each thread, each group of threads, and each disk, in that order.
Per-thread statistics first show the threads client number, group-id, and error code. The remaining figures are as follows:

Number of megabytes of I/O performed.

Average data rate (bandwidth).

runt

Threads run time.

slat

Submission latency minimum, maximum, average and standard deviation. This is the time it took to submit the I/O.

clat

Completion latency minimum, maximum, average and standard deviation. This is the time between submission and completion.

Bandwidth minimum, maximum, percentage of aggregate bandwidth received, average and standard deviation.

cpu

CPU usage statistics. Includes user and system time, number of context switches this thread went through and number of major and minor page faults.

IO depths

Distribution of I/O depths. Each depth includes everything less than (or equal) to it, but greater than the previous depth.

IO issued

Number of read/write requests issued, and number of short read/write requests.

IO latencies

Distribution of I/O completion latencies. The numbers follow the same pattern as IO depths.

The group statistics show:

Number of megabytes I/O performed.

aggrb

Aggregate bandwidth of threads in the group.

minb

Minimum average bandwidth a thread saw.

maxb

Maximum average bandwidth a thread saw.

mint

Shortest runtime of threads in the group.

maxt

Longest runtime of threads in the group.

Finally, disk statistics are printed with reads first:

ios

Number of I/Os performed by all groups.

merge

Number of merges in the I/O scheduler.

ticks

Number of ticks we kept the disk busy.

io_queue

Total time spent in the disk queue.

util
Disk utilization.
It is also possible to get fio to dump the current output while it is running, without terminating the job. To do that, send fio the USR1 signal.

Terse Output

If the --minimal option is given, the results will be printed in a semicolon-delimited format suitable for scripted use - a job description (if provided) follows on a new line. Note that the first number in the line is the version number. If the output has to be changed for some reason, this number will be incremented by 1 to signify that change. The fields are:

terse version, fio version, jobname, groupid, error

Read status:

Total I/O (KB), bandwidth (KB/s), IOPS, runtime (ms)

Submission latency: